|
|
Post by enicolas1985 on Jun 3, 2006 18:19:42 GMT 1
i have gta and when i try to load it up all i get is a blank screen. i went to fanjita and downloaded the latest eloader. the zips name in the end said nocache. i believe that is the right one. the farthers i got was when i go to the load menu on gta i see the eloader selection. after it says load complete and i say 'yes' to the current progress lost. then it shows th eloading screen but then goes to a blck screen forever.  ive tried it alot of times. edit: heres where i got the eloader.... files.fanjita.org/psp/eloader097_nocache.zip |
|
kyros
New Member
Posts: 17
|
Post by kyros on Jun 3, 2006 20:13:29 GMT 1
Are you using a Windows computer? because if you are then go to this website noobz.eu/index.html and scroll down till you see eloader 0.97 Bock and download the Auto-Installer for Windows and when you do make sure your USB cable is connected to your PSP before you run the Auto-Installer, after that is complete safetly remove your USB cable from your PSP and load GTA:LC and see if the problem is still there...Also you might want to download emenu--v0.1 Final Auto-Installer for Windows from the same website. |
|
|
|
Post by enicolas1985 on Jun 3, 2006 20:58:22 GMT 1
i tried it but got the same thing. exact same thing.
|
|
kyros
New Member
Posts: 17
|
Post by kyros on Jun 3, 2006 21:46:38 GMT 1
Ok try this...connect your PSP to your computer and open up the PSP file and then open up the SAVEDATA file, now you should have two (Unless you have other saved game files) files there one for the eloader and one of your GTA:LC saved game, ok now save your GTA:LC file to your hard drive for back up then after you saved it to your hard drive delete the GTA:LC saved file from your PSP so that nothing but the eloader file is there (Unless you have other saved game files there, leave them be) now once again safetly remove your PSP from your computer and load GTA:LC, this time instead of loading your game it'll automatically load eloader so you'll notice the load bar stops halfway...see if that works if not then I'm out of suggestions.
|
|
|
|
Post by nguman on Jun 4, 2006 3:18:24 GMT 1
try putting the bin file in the proper place
|
|
|
|
Post by enicolas1985 on Jun 4, 2006 5:02:21 GMT 1
ive always had only the eloader in the savedata file. i just bought the psp and gta. now i was wondering that since i have v2.6 isnt there a 'special' way to load the eloader? thats what it says in the sticky.
also where would the bin file properly go?
|
|
kyros
New Member
Posts: 17
|
Post by kyros on Jun 4, 2006 18:48:19 GMT 1
The DATA (BIN File) and the tetris (BIN File) both go with PARAM.SFO (SFO File), icon0 (PNG Image) and PIC1 (PNG Image) in the ULUS1004155 Folder which goes in your SAVEDATA Folder.
|
|
|
|
Post by manias on Jun 4, 2006 23:47:05 GMT 1
you have to have at least one homebrew installed or else eloader crashes.. and this isn't the right forum, search fanjita's  |
|
|
|
Post by enicolas1985 on Jun 5, 2006 5:02:19 GMT 1
i know this might be asking too much but is it possible for someone to send me a zip file with the essential things i need?
like a zip file that has everything where it supposed to be and i'll just drop it in there?
|
|
kyros
New Member
Posts: 17
|
Post by kyros on Jun 5, 2006 9:05:09 GMT 1
If your using a Window PC then just download the Auto-Installer for Windows at noobz.eu/index.html and connect your PSP to your computer, it'll automatically put everything where it's supposed to go. |
|
|
|
Post by enicolas1985 on Jun 6, 2006 7:57:06 GMT 1
thanks. but for some reason when i try to do the automatic loader it says it failed copying some files. i was hoping i couls get a sure working zip.
|
|
|
|
Post by manias on Jun 6, 2006 9:56:27 GMT 1
if you are using a new memorystick, make sure u formatted it.. it adds some needed folders to the memstick (strange to call it formatting but hey ) and delete the old zipfiles first before doing the auto installer? |
|
|
|
Post by enicolas1985 on Jun 6, 2006 11:08:23 GMT 1
|
|
|
|
Post by manias on Jun 6, 2006 11:39:38 GMT 1
look, just use the autoinstaller for .96 (.97 has issues with 333mhz) or .97(if u want wifi). if those don't work the rest won't either. the autoinstaller is nothing more than a file that auto-extracts a zip file to the correct folders. Nothing fancy and works the same as you manually extracting them.
i think you don't have any homebrew (eboots) in the psp\game folder.. read up mate.
|
|
|
|
Post by enicolas1985 on Jun 6, 2006 20:32:57 GMT 1
i have been reading up and im still alittle confused. but thanks anyways. i will try it later today with 096 auto installer. thank you manias. but i was still curious if my set ups work at all. just wondering if i could give those to people and have it work.
|
|
|
|
Post by cybernatorsnes on Jun 12, 2006 20:48:57 GMT 1
I've actually been having the same problem.
I've tried both eloader .96 and .97bock, but the SNES 0.4.2 still doesn't work (only shows a blank white screen).
This is confusing me because verison .3 worked perfectly.
Every other homebrew I've used has worked.
I'm currently using firmware 2.6, so my situation is exactly the same.
Could it be a problem with SNES 0.4.2 itself when it comes to v2.6 firmware?
|
|
|
|
Post by manias on Jun 12, 2006 21:43:16 GMT 1
use the intro-less version (Search this forum)
|
|
|
|
Post by cybernatorsnes on Jun 12, 2006 23:22:24 GMT 1
use the intro-less version (Search this forum) Thanks for the help. The emulator works great. |
|
|
|
Post by manias on Jun 15, 2006 16:45:58 GMT 1
|
|
