jbp
New Member
Posts: 20
|
Post by jbp on Jun 22, 2005 22:28:05 GMT 1
For Zire 31 and possibly Treo 600. You'll need to use the low-res version of LJP 0.9.2. Both are available from this page: www.make-believe.org/downloads/ljpz31.htmlNotes:- It's slow if you've got sound enabled on a complex rom on the Zire 31. Consider overclocking or turning off the sound. Certainly use a frameskip greater than 1; probably autoskip.
- It ignores the smoothing/renderer options you choose from the SNES Video config, though it respects the other options on that page.
- It's pretty small! I used a filter that makes text surprisingly legible, but sometimes it's a wee bit hard to read for some roms. But you knew that already.
- Tested on ~6 roms. Works for me. Your mileage may vary.
- I'm going to collect all these changes and pass them on to Tinnus this weekend hopefully. By the way, here's another vote for some source control -- I'd say investigate Sourceforge.
- It's your lucky day.
|
|
|
|
Post by Tinnus on Jun 22, 2005 22:42:20 GMT 1
Oh man we've got a programmer with a low-res device -- the only thing that LJP was missing to be completely kickass ;D I'm pretty sure the very same filter can be used in NES and SMS too! And BTW if you care about Genesis, it would be a simple 1/2 scale, 320x240->160x120. I think you've got the motivation to do it more than I do, and I need to get Atari going too.  |
|
jbp
New Member
Posts: 20
|
Post by jbp on Jun 22, 2005 22:49:43 GMT 1
Yep, I'm planning on doing the NES and SMS modules soon as I have time. Haven't looked at the Genesis code at all yet; will have to investigate.
|
|
|
|
Post by maurizio86 on Jun 23, 2005 13:33:48 GMT 1
thanks thousands for all which you are making for the low resolution thanks also from my zire31  |
|
|
|
Post by stranger725 on Jun 25, 2005 12:59:01 GMT 1
i envy you guys, i hope that someday i could do the same things you are doing right now!
to tinnus, yoyofr, jbp and other programmers you rock!!!
|
|
jbp
New Member
Posts: 20
|
Post by jbp on Jun 26, 2005 6:27:01 GMT 1
Ha, thanks mate. My changes are pretty trivial really, compared to what yoyo and tinnus are doing. Anyway, I've got a new low-res version of LJP on my site with support for SMS and NES. www.make-believe.org/downloads/ljpz31.htmlSource code is there too. |
|
|
|
Post by maurizio86 on Jun 26, 2005 22:59:29 GMT 1
you a six myth thanks still |
|
|
|
Post by catbert00 on Jun 29, 2005 22:21:02 GMT 1
I tried it out for a couple minutes on my Treo 600. Works great!!!!! ;D Now I can exit without having to pull out my stylus and reset the Treo!
I only tried a GB ROM...
|
|
|
|
Post by anitanium on Jul 4, 2005 5:17:53 GMT 1
GB works perfectly!
whenever i try to switch to SNES module, treo 600 resets
|
|
jbp
New Member
Posts: 20
|
Post by jbp on Jul 5, 2005 1:32:54 GMT 1
anitanium, are you using UDMH? How much RAM does the LJP launcher report?
|
|
|
|
Post by anitanium on Jul 7, 2005 1:08:38 GMT 1
no, i'm not using UDMH
i suppose that's the problem
treo reports around 2000k
|
|
|
|
Post by Tinnus on Jul 7, 2005 1:25:36 GMT 1
That's the problem, use UDMH and be sure to have 10MB (or maybe more) free RAM.
|
|
|
|
Post by anitanium on Jul 7, 2005 1:44:21 GMT 1
aww pooey
i guess gameboy will keep me busy until i feel the need snes
|
|
