|
Post by randumkid on Aug 1, 2008 13:56:03 GMT 1
ok when i select a rom for the system lets say the neo pocket gear it shows an "ok" orange button in the center and if i click it i see pixels going blank and this causes me to rrestart my palm
|
|
|
Post by randumkid on Aug 1, 2008 18:30:23 GMT 1
any help.....any1? sorry bout 2x posting
|
|
|
Post by coder12 on Aug 1, 2008 19:29:43 GMT 1
Dude, it's been 5 hours. Try a reinstall and see if that helps. Otherwise try udmh or mhh and make sure you have enough free ram.
|
|
|
Post by randumkid on Aug 1, 2008 20:42:15 GMT 1
ive had the program for about 3+ weeks.....ive reinstalled it, got the new version, and the ngp problems never say not enough mem.... like the snes does.....
|
|
natepless
Junior Member
SHAQ-FU BABY!!!!!!!!!!!!!!!!!!!!!!
Posts: 74
|
Post by natepless on Aug 2, 2008 13:06:18 GMT 1
What kind of device do you have?
|
|
|
Post by coder12 on Aug 2, 2008 14:30:12 GMT 1
Well, maybe it's a corrupt rom. Try a different one.
|
|
|
Post by randumkid on Aug 2, 2008 18:43:51 GMT 1
i have a tungston e2 and i dont think its a currupt roms cause then ALL my roms are currupt.i have alot.....
|
|
|
Post by luckyluke on Aug 3, 2008 11:18:18 GMT 1
Do you use UDMH? What is shown at "RAM: " and "DB" in the LJP launcher? Which version of LJP are you using? Is the "ok" message the only debug message or are there any other before this one?
|
|
|
Post by randumkid on Aug 4, 2008 1:24:04 GMT 1
ok no i dont wanna pay 10 bucks for sumtin ummm ram 3506/3493.....db is 8166/7775......first is comes up with an ok box then it displays the rom name then is displays an ok box inside the rom name and you cant press it cause it frezzes up my palm... so i have to reset...how doi use cleanstart?
|
|
|
Post by coder12 on Aug 4, 2008 2:25:20 GMT 1
Actually, UDMH is worth every penny. And you get a free trial so just download it, and install it. After the trial is over decide if you want to buy it (you Should want to buy it) or just delete it. If you want to play snes, you will need this program.
To use clean start, just run the prc file and uncheck all of the boxes except for the ROM apps. and your overclocking program and if you decide to use it udmh. then click the reset program and launch ljp.
Please, read every guide, try every troubleshoot you can, and please talk in seperate sentences with correct english skills.
|
|