hawkeyefile
Junior Member
Tungsten E USER! with amiga!
Posts: 54
|
Post by hawkeyefile on Aug 28, 2005 5:17:51 GMT 1
i was wondering if it where posible to change the better warning and buttery cut off limit to something lower than 3.77 v on my T|E.
|
|
|
|
Post by Tinnus on Aug 28, 2005 13:19:34 GMT 1
FullPower does just that.
|
|
hawkeyefile
Junior Member
Tungsten E USER! with amiga!
Posts: 54
|
Post by hawkeyefile on Aug 28, 2005 16:59:24 GMT 1
link please.
|
|
|
|
Post by Tinnus on Aug 28, 2005 19:18:06 GMT 1
|
|
hawkeyefile
Junior Member
Tungsten E USER! with amiga!
Posts: 54
|
Post by hawkeyefile on Aug 28, 2005 20:05:18 GMT 1
ive tried it and thank you you know owe me a new T|E it does not even work now.
|
|
|
|
Post by snempaa on Aug 28, 2005 20:45:27 GMT 1
try a clean reset (holding the up key while resetting), otherwise a hard reset by holding the powerbutton while reset, otherwise recharge the battery;) I don't think the software can damage the palm
|
|
hawkeyefile
Junior Member
Tungsten E USER! with amiga!
Posts: 54
|
Post by hawkeyefile on Aug 28, 2005 20:53:50 GMT 1
it did for my t|E
|
|
|
|
Post by snempaa on Aug 28, 2005 21:06:31 GMT 1
Well I just installed it on my T|E and it works quite ok, must be some other problem.
By the way, where did you get the binaries to get linux on your T|E because on palmtelinux.sf.net there are no binaries available.
|
|
hawkeyefile
Junior Member
Tungsten E USER! with amiga!
Posts: 54
|
Post by hawkeyefile on Aug 28, 2005 21:51:33 GMT 1
cant remember, a friend of mine did it.
|
|
kayge
Full Member
Posts: 134
|
Post by kayge on Aug 28, 2005 23:02:39 GMT 1
Hawkeyefile,
hard reset and then remove fullpower from you backup files on your PC.
Fullpower freezes up my Zire72 after a soft reset. I have to get it right out of my backup files. Previous trial versions didn't do this, but made my device unstable. I'm still waiting for a more stable version.
I don't believe it can actualy damage your device though.
|
|
