|
|
Post by tdipane on Dec 16, 2005 8:02:34 GMT 1
Every time I exit LJP on my Treo 650, the device resets. Not sure why. It runs fine when I'm using LJP, but every stinkin' time I exit, it resets. Any ideas?
|
|
|
|
Post by Tinnus on Dec 16, 2005 13:37:10 GMT 1
Most likely related to the unstability problems of the launcher; wait for the next version and see if it solves it.
|
|
cid
New Member
Posts: 13
|
Post by cid on Dec 16, 2005 17:13:39 GMT 1
this one is for mello_newf, do u think if i get the fix for the lifedrive to use 2 buttons at the same time will work on my UX50???
|
|
mello_newf
Junior Member
The Newf With A T5
Posts: 68
|
Post by mello_newf on Dec 16, 2005 21:54:56 GMT 1
I don't think that will work, and I wouldn't suggest trying it. I tried looking around for a fix but could only find requests for one.  The most interesting one I found was at palm powerups, someone asked dmitrygr if it was possible to make a fix for the UX50 dmitrygr said its possible but it would slow down the entire UX50 if he did. Its very unlikely he will do it though, he is very busy with other projects at the moment. So I guess you stuck playing RPG games, but that isn't so bad its really hard to play action or fighting games on a palm anyways. Unless you have a zodiac. ;D |
|
cid
New Member
Posts: 13
|
Post by cid on Dec 17, 2005 1:20:23 GMT 1
thanks for the info mello, u r of great help
|
|
mello_newf
Junior Member
The Newf With A T5
Posts: 68
|
Post by mello_newf on Dec 17, 2005 1:43:56 GMT 1
Don't mention it, glade to help in any way possible.  |
|
cid
New Member
Posts: 13
|
Post by cid on Dec 17, 2005 2:47:08 GMT 1
will it be possible to make some kind of virtual pad on the graffiti area??? just a thought, but it might solve the problem and help many clie users like me. i have a nes emu for my casio e500 that has a virtual pad, maybe one can be added to the palm as well
|
|
mello_newf
Junior Member
The Newf With A T5
Posts: 68
|
Post by mello_newf on Dec 17, 2005 4:01:58 GMT 1
Yes that has been suggested before. It is on the LJP to-do list, I don't think it will be in RC3 but I would think it should eventually find its way to a future release. |
|
cid
New Member
Posts: 13
|
Post by cid on Dec 17, 2005 4:55:05 GMT 1
hey i just found something interesting,i use the upper virtual keys and the hard keys at the same time on the NES, the problem is that in most games when i press them they act like i press them many times. The bottom V keys cant be used at the same time with the hard keys, they pause the game and open the config screen,kinda strange. on SNES they dont work as good, when i press them they act as some kind of shortcut to the config and change my settings. I'll keep trying with the other systems and see what i can find
|
|
|
|
Post by Tinnus on Dec 17, 2005 15:36:15 GMT 1
BTW if I do a virtual pad, which means, buttons at the screen/DIA/silkscreen, only 1 screen button would be able to be pressed at a time.
|
|
|
|
Post by dekaritae on Dec 25, 2005 8:01:10 GMT 1
In the last few hours, I've been getting a consistent crash when exiting LJP 1.0 RC2 using any method. The exact error is
Fatal Exception: 10 0000003F
20051DF1 20051312 3620FDBC
My device is a Zodiac 1 with roughly 9 Mb of free memory.
Update: I just tried renaming the ljp.ini file after a soft reset, and it no longer crashes on exit.
|
|
|
|
Post by dekaritae on Dec 25, 2005 8:18:16 GMT 1
And the crashing returns. I completely removed the LJP folder from the SD card, did a soft reset, and that stopped the crashing, but after reconfuring LJP, it again crashes on exit.
|
|
mello_newf
Junior Member
The Newf With A T5
Posts: 68
|
Post by mello_newf on Dec 25, 2005 18:01:02 GMT 1
Uninstall everything related to LJP including the .zem files and reinstall with the instiller.
(You can keep the ROM's and directories were they are)
|
|
|
|
Post by dekaritae on Dec 25, 2005 21:56:35 GMT 1
Yeah, I ended up doing that. I think I figured out what the problem was. I had two roms in the GENS folder that I'd forgotten to remove earlier. When I took those out, the crashing stopped.
|
|
|
|
Post by dekaritae on Dec 26, 2005 1:39:03 GMT 1
Grauuu, I was wrong. It's still crashing. If I don't change any of the options under the 'Options' button, it stays reasonably stable, but if I even click on that button and then go back to the Browser, it will crash when I close LJP.
|
|
|
|
Post by Jeffrey on Jan 8, 2006 17:03:39 GMT 1
so when can we see the LJP 1.0 RC3 around? I wasnt sure how long it would take for the last 20percent. Another 2 weeks or so or is it coming to a close for the next version?
|
|
|
|
Post by Tinnus on Jan 8, 2006 18:23:15 GMT 1
No idea. When we manage to solve the launcher unstability problems.
|
|
brazu
New Member
Posts: 1
|
Post by brazu on Jan 12, 2006 22:46:23 GMT 1
I have a Treo 600....i installed LJP for the first time today...only had time to copy Atari roms to my SD card.
I open the program and the browser shows the roms fine....but when I pick up one and tap on LAUNCH....it begins to launch and then RESET!!....don't even receive a error message............
Does anyone has this problem???
|
|
|
|
Post by Tinnus on Jan 13, 2006 15:40:25 GMT 1
If you looked carefully you'd see that RC2 doesn't support Atari for low-res, but RC3 will. You can, however get the RC3 Atari module with low-res support at the below address and see how it goes; I *suppose* it should work. Get it at your own risk though; I will not support problems regarding this one until RC3 is out  tinnus.gp32z.com/ljp-vcs.zem |
|
Driado
New Member
Treo 650 w/ 1GB SD card.
Posts: 13
|
Post by Driado on Feb 4, 2006 18:24:41 GMT 1
I just did a fresh install of RC2, and I used the mp3 trick to sync my roms to my card. After renaming them and moving them to the proper directory, I launch LJP and I see the roms. I only have NES roms, and when I run any of them, I get the same error.
"Unrecognized PNO format."
"Error while loading PNO."
"259"
Any help?
|
|
|
|
Post by Tinnus on Feb 5, 2006 2:36:20 GMT 1
Download again, it looks like you got corrupted files. Also, are you sure the ZEMs are at the right folder in the card? Additionally, try downloading the ZIP if you got the installer and vice versa.
|
|
|
|
Post by nvblubrd on Mar 9, 2006 22:25:40 GMT 1
I can't get Bee 52 or Big Nose Freaks-Out to work in LJP 1.0 RC2 on a Zire 72s but all of the other Codemaster/Camericas with a 71 mapper work fine. What am I doing wrong?
|
|
|
|
Post by beavis on Mar 10, 2006 1:29:43 GMT 1
Interesting... On my T|E, Bee 52 shows nothing but the Code Masters Logo, then a purple screen.
Big Nose Freaks Out starts up and plays, but has many graphical anomalies and the screen flashes randomly.
Seems I remember having problems with these on pc emulators as well.
|
|
|
|
Post by nvblubrd on Mar 10, 2006 3:50:41 GMT 1
Thats what I get too. But on the PC emulator FCE ultra Bee 52 works great Big Nose freaks out has some problems at the begining ,screen flickering, that could almost be part of the game then you bounce on a mushroom and and its fine. FCE 0.98.12 has some kind on an editor in it. Is there any way to use this to repair the games so they will work on LJP?
|
|
|
|
Post by jdimaria on Mar 27, 2006 22:13:01 GMT 1
hey i tried upgrading from the rc1 to the rc2. ive deleted ljp from my treo 650 and the .zem files from the sd card before installing ljp rc2. the i installed the prc file for ljp and put the roms in the correct directories allong with the .zem files for the correct folders and the the ljp_stuff.zem file. when i try to play a rom "infos" comes up and says 0136 then i press ok and the same thing with 013D comes up. can anyone identify this problem? my RC1 worked excelent! thanks for putting the time into creating this prog, it really is amazing. please help with my problem if you can. thank you
jojo
|
|
|
|
Post by Tinnus on Mar 27, 2006 22:41:20 GMT 1
Use the 'launch' button. I think you're using the center button in the d-pad to launch the game? That was some leftover debug stuff for checking keycodes.
|
|
|
|
Post by _Em on Mar 28, 2006 0:30:59 GMT 1
Just FYI: that's the same issue I reported having with the T|X Tinnus... and it's just a situation where the launcher doesn't recognize the L, R, or centre buttons on the current generation 5-way pads. Along this line of thought, I just realized: in RC3 and later, is the centre button hard coded to the Launch button, or will it perform a quickload if there's a quicksave available? I realised that there are situations where I might want one or the other |
|
|
|
Post by Tinnus on Mar 29, 2006 18:09:06 GMT 1
It always was hard-coded to the same action as the LAUNCH button.. uh... I think.
|
|
|
|
Post by Zer0linK on Apr 8, 2006 19:38:44 GMT 1
Hi, i'm playing "Zelda Oracle of Seasons" and I have a problem: To do an action i need to Keep presing button A and press any direction button, but it doesn't work,i cant press two keys at the same time. is that normal?
PD.: I have a Zire31
PD2:Equally Its a Very Good Work.
|
|
|
|
Post by beavis on Apr 8, 2006 22:30:52 GMT 1
Have you checked out LifeKeys at www.palmpowerups.com ? It was made to solve this problem. btw - a forum search of "zire31" would probably return this answer, as it has been discussed before. edit - That being said, welcome to the forums and enjoy your stay. We're here to help. |
|
The most interesting one I found was at palm powerups, someone asked dmitrygr if it was possible to make a fix for the UX50 dmitrygr said its possible but it would slow down the entire UX50 if he did. Its very unlikely he will do it though, he is very busy with other projects at the moment. 
