|
|
Post by vilmos on Nov 22, 2006 15:25:49 GMT 1
I have the sources here if you need them. I also have the fixed genesis module for RC3 using the newer cyclone and all that jazz. ljp-gen.zipThat should work in a minute, gotta add this site to the whitelist for leeching.  |
|
|
|
Post by metaview on Nov 22, 2006 22:10:33 GMT 1
What about the Treo-keyboard support? Any progress here? Shall I add it? Where is the source (launcher and button-handling)?
|
|
|
|
Post by tgwaste on Nov 22, 2006 22:23:00 GMT 1
anyone confirm this works as normal on the Treo 680 yet? Just ordered my unlocked ver today !  |
|
|
|
Post by tgwaste on Nov 22, 2006 22:28:34 GMT 1
What about the Treo-keyboard support? Any progress here? Shall I add it? Where is the source (launcher and button-handling)? would rock to add this.. although im not sure its possible to add these functionality and still keep the software fast.. |
|
|
|
Post by vilmos on Nov 22, 2006 22:46:12 GMT 1
Here is the source that I got, not sure everything is there, all I was doing was trying to build the genesis module. This one doesn't have the new genesis because I've made a mess of it trying to add Drz80 to it (and failing so far). ljp-src-1.0rc3.ace |
|
|
|
Post by metaview on Nov 23, 2006 0:12:11 GMT 1
tgwaste: well, check Duke3D for an example
vilmos: thx, when I get it compiled, I will add the support
|
|
|
|
Post by tgwaste on Nov 24, 2006 7:43:24 GMT 1
tgwaste: well, check Duke3D for an example vilmos: thx, when I get it compiled, I will add the support meta.. hey if you can add the treo keyboard support and not sacrafice efficiency.. then you will be a hereo to us ALL, i've no doubt!! best of luck in your endeavors..  |
|
|
|
Post by elinscheid on Nov 24, 2006 21:44:37 GMT 1
tgwaste: well, check Duke3D for an example vilmos: thx, when I get it compiled, I will add the support meta.. hey if you can add the treo keyboard support and not sacrafice efficiency.. then you will be a hereo to us ALL, i've no doubt!! best of luck in your endeavors.. Indeed! If there are still people working on this project then your combined efforts are much appreciated! In one week I get my Treo 680 and I will start donating again. |
|
|
|
Post by metaview on Nov 27, 2006 11:30:50 GMT 1
Well, it seems I only get some modules (like SNES) compiled. If it now also runs then I add it here and someone needs to propagate it to the other modules. But the key-handling is the shared, so it might be done already for every other module.
|
|
|
|
Post by tgwaste on Nov 27, 2006 19:58:24 GMT 1
Well, it seems I only get some modules (like SNES) compiled. If it now also runs then I add it here and someone needs to propagate it to the other modules. But the key-handling is the shared, so it might be done already for every other module. hmm, not sure I quite understand, but afaik there is no treo key-handling coded anywhere in little-john.. (outside the normal keys).. im speaking of the actual alpha-keyboard btw.. |
|
|
|
Post by angel on Nov 27, 2006 20:28:23 GMT 1
Is it possible you add the infrared/bluetooth support to the RC3 metaview ? Would be great |
|
|
|
Post by metaview on Nov 27, 2006 21:17:46 GMT 1
tgwaste: What I wanted to say was, the call to handle the keys seems to be the same in all modules. Means, doing it for SNES would bring this feature also to every other module. I can't compile anything meaningful expect SNES and therefore can't test it. @angle: Well, let's see :-)
|
|
|
|
Post by vilmos on Nov 27, 2006 21:23:50 GMT 1
Sorry I don't think the source I posted was complete, but it is all that I had available and that's better than nothing at least.
It should be the same code for the buttons on all the modules, it is in LJP_main or something like that. I haven't looked at it in ages. Check the targets though, there should be a build all that will try them all out. Then you need to run the script to zip all the .lem files up.
|
|
|
|
Post by tgwaste on Nov 27, 2006 21:31:50 GMT 1
tgwaste: What I wanted to say was, the call to handle the keys seems to be the same in all modules. Means, doing it for SNES would bring this feature also to every other module. I can't compile anything meaningful expect SNES and therefore can't test it meta: ahh I gotcha. Ya know I dont think I ever saw a source-code release for RC3. Tinnus, maybe you can help in this regard? |
|
|
|
Post by Tinnus on Nov 27, 2006 22:52:00 GMT 1
I don't think I have the RC3 source packed up either  What I have is just the current code. I might as well release it as-is though, since the next step (probably in later December or January) will be LJR and that's basically grounds-up. |
|
|
|
Post by tgwaste on Nov 28, 2006 2:11:33 GMT 1
I don't think I have the RC3 source packed up either What I have is just the current code. I might as well release it as-is though, since the next step (probably in later December or January) will be LJR and that's basically grounds-up. ya, you should, then the smart palm kids here can add kewl stuff to tide us over till then. |
|
|
|
Post by angel on Nov 28, 2006 15:05:35 GMT 1
@angle: Well, let's see :-) That would be godly usefull the IR/BT support already changed my life with the "Z" soft you updated, the two last programs who would need it are LJP & Palmmame (because i'm ruining my buttons with raiden  ) |
|
|
|
Post by vilmos on Nov 28, 2006 22:29:23 GMT 1
That would be godly usefull the IR/BT support already changed my life with the "Z" soft you updated, the two last programs who would need it are LJP & Palmmame (because i'm ruining my buttons with raiden ) I'll be starting on that sort of thing in January for PalmMAME. |
|
|
|
Post by metaview on Nov 28, 2006 22:54:12 GMT 1
Hm, "kid" might not really fit anymore ;D |
|
|
|
Post by tgwaste on Nov 28, 2006 23:01:44 GMT 1
Hm, "kid" might not really fit anymore ;D its a figure of speach.. now get BACK TO WORK! heh |
|
|
|
Post by needhelp on Dec 26, 2006 2:57:24 GMT 1
Just wondering, when will LJP 1.0 RC3 be released, you know, not the pre one, but the actual one, out of curiosity? Also, I know this is an odd question, but is it possible to know how many people out there(in these forums) got their palm to run LJP 1.0 RC3 and what there device was? Thanks |
|
|
|
Post by Tinnus on Dec 26, 2006 20:29:32 GMT 1
(pre) is in parentheses, that meant it would be "pre" until proven stable enough, which it was So no RC3 without "pre". Next release (not promising any dates, sorry) will be LJR and stuff. |
|
maxer
Junior Member
Sit, Ubu, sit! Good dog! Woof!
Posts: 77
|
Post by maxer on Jan 18, 2007 19:03:07 GMT 1
hello folks! ive finally decided to creep my way out of the proverbial internet closet ... ive been a regular reader for a few months now, but this is my first time posting ... i discovered LJP about 6 months ago - i absolutely love it! by far the best free emulator on the market! ive been using it on my treo 650 and dont get much reading done these days was curious if anyone else was getting any errors when playing? ive had a few problems when receiving phone calls or SMS msgs (LJP freezes up/stalls out and I have to reset the old fashioned way with a pull of the back cover panel). Is there a way to combat the need to reset this way if its frozen? anyone else freezing up? Also forgive me for asking , but what was the result of the above discussion to upgrade to a newer version of LJP? Will it be updated to include: qwerty keyboard mapping, UDMH-like stuff internally, IR support, or an update to block calls/sms msgs or fix the freezing issues? I know there are a few of you out there with skills enough to program/re-program things to work better ... unfortunatly I am just an unskilled user. PS - any tips for learning to create an emulator and (eventually/hopefully) contribute to projects like this? Id be starting from scratch, but am a fast learner ..... PPS - Tinnus, i notice you are the moderator - are you also a developer? Who created/owns the LJP project? Thanks so much for your efforts I appreciate all that you have done for us so far! ;D |
|
|
|
Post by Tinnus on Jan 18, 2007 23:54:33 GMT 1
I've more or less taken over, not that I did many stuff lately though But the project was started by yoyofr originally (the admin here). |
|
maxer
Junior Member
Sit, Ubu, sit! Good dog! Woof!
Posts: 77
|
Post by maxer on Jan 19, 2007 20:02:56 GMT 1
Thanks for the info Tinnus!
Any plans to update any of the above mentioned items in the next release of LJP? to add to that list, i was wondering if there could be a counter added to each emulators page counting the total number of roms its reading from your files?
also, ive seen mention of *LJR*, what exactly is that?
thanks for the help Tinnus
|
|
|
|
Post by needhelp on Jan 19, 2007 21:41:16 GMT 1
Hello there maxer,
The JLR is supposed to be LJR, it's Little John, but for the zodiac not the palmOS.
Tinnus, just wondering, what programming language are you guys using to code LJP?
Thanks
|
|
|
|
Post by _Em on Jan 19, 2007 22:04:52 GMT 1
I think your response was a bit confusing... LJZ was Little John for Zodiac. It was later expanded to LJP for PalmOS. The current unreleased project is LJR. I can never remember what Tinnus says the R stands for, but I always think of it as Little John Rewrite The features suggestions would be best in the LJR feature request thread where Tinnus can find them easily, instead of in the LJPrc3 thread This thread was (I thought) supposed to be for bug reports from people currently running LJPrc3. Anyway, welcome, new members, to the forum! Search the related threads, as there has been a LOT of discussion on this board about the various emulators. |
|
maxer
Junior Member
Sit, Ubu, sit! Good dog! Woof!
Posts: 77
|
Post by maxer on Jan 19, 2007 22:57:23 GMT 1
Thanks for the clarifications _Em. (proofreading my own posts would help me tremendously!)
|
|
|
|
Post by melcrose on Jan 22, 2007 4:47:34 GMT 1
Can someone post a working link to LJ RC3? None of the referenced links seem to be working..
|
|
|
|
Post by beavis on Jan 22, 2007 8:50:06 GMT 1
|
|
)
